Elegant Neckroll

Deprecated: wp_make_content_images_responsive is deprecated since version 5.5.0! Use wp_filter_content_tags() instead. in /home/sewing/dev.sewing.org/wp-includes/functions.php on line 4779

This project from ElnaUSA was taken from “Making the Most of Your Basic Serger Accessories,” which was designed with the Elna serger consumer in mind. The elegant neckroll features such techniques as gathering and a blind hem. Something as simple as gathering on the serger can add texture and elegance to a designer neckroll. And with the addition of some quick serger techniques, the results will command many “oohs” and “aahs.”

Important Note: These project instructions are specific to Elna machines; however, the project can be adapted for use on other machines.
Skill level: beginner

Materials

3/4 yard each of two coordinating fabrics
One package purchased piping
Two 1″ self-covered buttons
Medium-sized cording for gathered ends
Fiber- or down-filled neck roll form
Large-eyed needle or bodkin
Optional: tassels

Serger Set-Up

Stitch Selection: Gathering Stitch (Elna ProCard 1); Blindhem (Elna ProCard 3); 3-thread wide
Attachments: Gathering foot; Blindhem foot
Thread: Polyester serger thread
Tensions: Gathering (UL-2.0, LL-2.0, RN-5.0, LN-6.0); Blindhem (UL-2.0, LL-2.0, LN-4.0)
Length: 4.0 for gathering
Differential Feed: 2.0 for gathering

1. Measure the overall length of pillow form and divide by 3 for length measurement. Measure the diameter of the pillow form. Note: all seams are 1/2”. For outer sections, cut fabric the length measurement + 1” by the diameter measurement + 1”. For the middle section, cut fabric the length measurement + 1” by the diameter measurement + 1” multiplied by 2 (for gathering). For circular end pieces, cut two more rectangles the diameter measurement + 1″ by radius measurement + 1-1/2″.

2. Set-up serger for gathering and attach gathering foot. Gather long edges of middle fabric. Serge each gathered edge to long edge of one outer section, right sides together. Then create a cylinder by serging remaining long edges right sides together.

3. Attach purchased piping to each end with sewing machine, overlapping ends for continuous piping. Serge short edges of end pieces right sides together to form small cylinders, and stitch one side to piped sections.

4. Set-up serger for a wide 3-thread stitch and attach the Blind Hem Foot. To make casing, fold back hem 1″ along remaining edge of end pieces. Blindhem in place leaving small opening for cord.

5. Thread bodkin or large-eyed needle with cording, insert in casing. Gather up tightly and tie ends. Cover buttons following directions on the package and attach over gathered ends.

6. Optional method of gathering pillow ends: Thread cording through hole on standard serger foot or through hole on support plate of multi-purpose foot.

7. Using a wide 3-thread stitch, serge over the cord creating a thread casing. Gather the cord to fit. Finish as above.

Tip: To increase the gathering on heavier fabrics, lower the pressure control on the presser foot or serge over the stitches a second time. Increase the needle tensions or pull the needle threads for tighter gathers.

To purchase the book, “Making the Most of Your Basic Serger Accessories,”
contact your local authorized Elna Dealer.
Project by JoAnn Pugh-Gannon, Sewing Information Resources
4/04